# Per-Project Aggregate: Why a Contract Asks for It and What It Changes

> What a per-project aggregate does to a general liability limit, why owners and GCs require it, and what to check on your policy. Call 844-97-USAVE.

Source: Gleason Insurance Brokers, LLC · 844-978-7283 · https://gleasoninsurancebrokers.com/blog/per-project-aggregate-explained
Updated 2026-11-12 · Reviewed by David Gleason, Principal

A general liability policy has an aggregate limit, the most it pays for most claims in a policy year. A per-project aggregate gives each job its own aggregate, so one project's claims are less likely to use up the limit another job is counting on.

## Quick answers

**Quick Answer:** A per-project aggregate gives each construction project its own general aggregate limit on a general liability policy, so claims on one job do not use up the limit available to another.

**Common Mistake:** Showing a per-project aggregate on a certificate without confirming the endorsement is attached to the policy and applies to the project in the contract.

**Broker Perspective:** This is one of the more common contract requirements for subcontractors on larger jobs, and the policy form decides whether every project is included or only scheduled ones.

**Insurance Impact:** Without a per-project aggregate, several claims in one year can reduce the limit left for every other job you are working.

**Key Fact:** The per-occurrence limit stays the same with a per-project aggregate; only the general aggregate is applied separately to each project.

**Definition:** A per-project aggregate is a general liability endorsement that applies a separate general aggregate limit to each designated construction project rather than one aggregate for all work.

**Bottom Line:** If a contract asks for a per-project aggregate, confirm the endorsement is on the policy and covers that project before work starts.

## How a general aggregate works

Most general liability policies list a per-occurrence limit and a general aggregate. The aggregate is the total the policy pays for most covered claims during the policy period, across every job you work.

If several claims land in the same year, they draw from the same aggregate. Once it is used up, the policy may have little or nothing left for the next claim until it renews.

- Per occurrence: the most paid for one occurrence
- General aggregate: the most paid for most claims in a policy year
- Every job draws from the same aggregate by default
- Claims on one job can reduce what is left for the others

## What the per-project aggregate changes

A designated construction project aggregate endorsement (often the ISO form CG 25 03) applies a separate general aggregate to each project, or to the projects it names. Claims from one job then draw on that job's own aggregate.

Some policies apply it to every project automatically and others schedule specific jobs. How it is written varies by carrier guidelines and policy terms.

- Each project gets its own general aggregate
- Commonly added with the CG 25 03 endorsement or a carrier's own form
- It may apply to all projects or only scheduled ones
- The per-occurrence limit does not change

## Why owners and general contractors require it

An owner or general contractor listed as an additional insured wants your limits available for their project, not used up by claims from a job across town. A per-project aggregate protects that.

Public works contracts and larger commercial jobs often require it, and it frequently appears beside additional insured, waiver of subrogation and primary and noncontributory requirements.

- Keeps limits available for the requesting party's project
- Common on public works and larger commercial contracts
- Usually listed with other insurance requirements
- Requirements vary by contract, so read each one

## What to check on your policy

Look for the per-project aggregate endorsement in the policy itself, not only on the certificate. Check whether it applies to all projects or only the ones scheduled, and whether a new contract means adding a project.

A broker can confirm how your policy is written and request the endorsement when a contract calls for it. Availability and any charge vary by carrier and risk.

- Confirm the endorsement is on the policy, not only the certificate
- Check whether it covers all projects or scheduled ones
- Ask whether new contracts need to be added
- Availability and cost vary by carrier and risk

## Frequently asked questions

### What does per-project aggregate mean on a certificate of insurance?

It means the general liability policy should apply a separate aggregate limit to each project. Confirm it with the endorsement on the policy, since a certificate is only a summary.

### Which endorsement adds a per-project aggregate?

The ISO form CG 25 03, designated construction project general aggregate limit, is commonly used. Some carriers use their own equivalent form.

### Does a per-project aggregate raise my per-occurrence limit?

No. The per-occurrence limit stays the same. Only the general aggregate is applied separately to each project.

### Why do general contractors require a per-project aggregate?

They want your limits available for their project instead of being used up by claims on other jobs you are working at the same time.

### Is a per-project aggregate the same as a per-location aggregate?

No. A per-location aggregate applies separately to each premises you own or rent. A per-project aggregate applies to construction projects.

### Does a per-project aggregate cost extra?

It can. Some policies include it and others add a charge. It varies by carrier, policy and the work you do.

### Do I need to add each new project to my policy?

It depends on how the endorsement is written. Some apply to all projects automatically and others list specific jobs. Your broker can confirm which form you have.

---

Gleason Insurance Brokers, LLC, 9477 Greenback Lane, #524A, Folsom, CA 95630. Call 844-978-7283 (844-97-USAVE). https://gleasoninsurancebrokers.com/blog/per-project-aggregate-explained
